Hello! Welcome to Guangdong Foshan Haoli Aluminum Profile Extruder website!

图片展示

FOSHAN NANHAI HAOLI MACHINERY CO.,LTD.

Guangdong . China

图片展示

4300 tons copper-aluminium profile extruder

4300 tons copper-aluminium profile extruder

产品详情

4300 tons copper-aluminium profile extruder




■technical parameter

Model3000T3600T4300T
柱塞直径Φ1180Φ1350

Φ1420

副缸直径Φ280×2Φ300×2Φ320×2
盛锭筒直径Φ250×4Φ280×4Φ280×4
主缸行程200023502600
铝棒尺寸Φ254×1300Φ280×1400Φ320×1500
模具尺寸Φ550×550Φ600×600Φ700×700
出料口尺寸Φ290×410Φ360×480Φ420×600
主机中心高185021002400
外形尺寸
               长×宽×高
15000×4500×550020000×6000×800023000×6000×8000
主电机机率110KW×6set132KW×6set220KW×4set
总功率(KW)7009001000
重量(吨)280380520
出料速度0-60mm/分钟
系统压力22Mpa      
电源380V                50HZ    
液压油68号无灰磨液压油      

How to determine the tonnage of aluminium profile extruder?

Extruder is the main equipment for producing aluminium profile. The shape and size of aluminium profile are closely related to its appearance and quality. There are many kinds of classifications of extruder. When many enterprises choose extruder, they should have a systematic understanding of extruder type, extrusion capacity and grade. How to determine the tonnage of aluminium profile extruder is also the choice of aluminium profile manufacturer. One aspect that must be considered when purchasing extruders is to explain the selection of tonnage of extruders today.

According to the type of alloy to be extruded, the annual production per machine and the maximum circumferential diameter of profiles, we will initially select the type of extruder. The first thing to consider is how large the tonnage of the extruder is.

When choosing the tonnage of extruder, the extrusion ratio of extruder, also known as extrusion coefficient, refers to the ratio of the cross-sectional area of extrusion cylinder to the total cross-sectional area of aluminium profile. It is the main parameter used to measure the deformation of aluminium alloy in the production of aluminium profile.

Lambda =Ft/ Sigma F1

Among them, Ft represents the cross-sectional area of the aluminium ingot filled in the extrusion cylinder, which is expressed by mm_.

_F1 represents the total cross-sectional area of extruded profiles and mm_represents it.

In the extrusion of aluminium profile, the deformation of aluminium alloy can also be expressed by the degree of deformation: e=lambda-1

If the extrusion process is used, the extrusion ratio is limited. The extrusion ratio of aluminium profile and aluminium bar in one extrusion is greater than 8-12, and the extrusion ratio of blank in second extrusion is not limited.

The above method is used to calculate the extrusion ratio. Simply speaking, the cross-section area of the extruded ingot is used to calculate the cross-section area of the extruded profile. Other methods can also be used to calculate the length of the extruded profile and the length of the ingot used for extrusion.

Before determining the tonnage of the extruder, it is necessary to know the cross-section shape of the profile, so as to determine the size of the die, and then determine the structure of the die, so as to determine whether the extruded hollow profile or solid profile, the tonnage of the extruder required for these two different structural profiles is different.

There are many classifications of extruders. According to the extrusion capacity, they can be divided into small, medium, large and heavy extruders. The extrusion capacity of each type of extruder is limited. The extrusion capacity is usually expressed by MN, that is, tonnage. The tonnage of 6063 Aluminium Profile extruder used in industrial production has the following standards:

Tonnage List of Extruders Used to Extrude 6063 Aluminum Profiles



Model

Tonnage of extruder

6063

500

600

800

1000

1200

1350

1600

1800

2000

 

2400-2800

3000

3500

4000

6000

8000

10000

12500

15000


The above-mentioned tonnage extruders can be used to extrude 6063 profiles. When selecting the tonnage of extruders, aluminium profiles manufacturers should fully consider the extrusion coefficient of extruders, the section shape of profiles and the size of dies, as well as their own production conditions and product requirements. According to the calculation formula, the deformation of metals can be obtained, thus determining the appropriate tonnage of extruders, which can extrude the quality of products. Qualified aluminium profile products will not cause unnecessary economic waste to enterprises.




Foshan Nanhai Haoli Machinery Co., Ltd.

Address: Guanyao Yaoling Group, Shishan Town, Nanhai District, Foshan City, Guangdong Province.P.R.C.

TEL:0086-757-81199908 

FAX:0086-757-81199909

Mobile:0086-013928648133,0086-013709669635

http://www.fshaoli.com

E-mail: haolijixie01@126.com

pc:528237



4300 tons copper-aluminium profile extruder
4300 tons copper-aluminium profile extruder
Long press to look detail
Long by picture save/share

About Recruit    |  News  Products   |  Contact 

 

(C)Foshan Nanhai Haoli Machinery Co., Ltd.

Address: Guanyao Yaoling Group, Shishan Town, Nanhai District, Foshan City, Guangdong Province.P.R.C.

TEL:0086-757-81199908 

FAX:0086-757-81199909

Mobile:0086-013928648133,0086-013709669635

http://www.fshaoli.com

E-mail: haolijixie01@126.com

pc:528237

 



Sweep and tweet    

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了